Machinery and parts guides
95 practical articles on inspecting, maintaining and repairing farm machinery, and on sourcing the right parts.state directory.
- Air Seeder Cart Inspection FormHow to inspect an air seeder cart before planting: fan, meters, hoses, tank seals and tires, plus what to check on a used or salvage part before you buy it.
- ATV/UTV Farm Use Safety InspectionA practical pre-ride check for farm ATVs and UTVs covering tires, brakes, steering, cargo and rollover protection, with notes on buying used or salvage parts.
- Auger & Conveyor Inspection RecordHow to inspect augers and conveyors for worn flighting, bad bearings, loose chains and missing guards, plus how to match replacement or salvage parts correctly.
- Auger Post Driver Maintenance LogKeep a hydraulic post driver or auger attachment running with the right checks on hoses, pins, bits, gearboxes and mounts, and know when used parts are safe.
- Bale Wrapper Maintenance LogWhat to check on an in-line or single bale wrapper: film stretch units, rollers, chains, hydraulics and sensors, and which wear parts to keep on the shelf.
- Baler Knotter Troubleshooting GuideDiagnose missed knots, tails, and broken twine on a square baler by symptom, and learn which knotter parts wear and when to call a dealer.
- Battery Maintenance & Testing LogKeep farm equipment batteries starting reliably with cleaning, charging, load testing and cable checks, plus safe handling and tips for matching replacement units.
- Box Blade & Scraper InspectionWhat to check on a box blade or scraper blade: cutting edge, shanks, side plates, hitch pins and hydraulics, and how to choose between new and used wear parts.
- Brake Adjustment Log for TrailersHow to check and record trailer brake condition: drums, pads or shoes, wheel bearings, lines and the breakaway system, and why brake parts should be bought new.
- Bucket Elevator Maintenance LogInspect a grain bucket elevator safely: belt, buckets, head and boot pulleys, bearings, tracking and dust control, plus tips for matching replacement parts.
- Center Pivot Inspection ChecklistWalk a center pivot tower by tower: gearboxes, drive tires, alignment, couplers and sprinklers, plus what to inspect before ordering parts or buying salvage.
- Chain Hoist Inspection LogHow to inspect a shop chain hoist before lifting an engine or implement: chain, hooks, latches, brakes and load tags, and when to retire the hoist or buy new.
- Chainsaw Safety & Maintenance ChecklistKeep a farm chainsaw safe and cutting straight: chain condition, bar wear, brake and chain catcher checks, fueling habits, kickback awareness and spare parts.
- Combine Daily Inspection & Cleaning ChecklistA practical morning and end-of-day routine for combines: blow-off for fire prevention, belts, chains, fluids, filters, and what to note for parts ordering.
- Combine Harvest Preparation ChecklistGet a combine ready before harvest: off-season repairs, parts to order early, calibration, field test, and safe practices so breakdowns do not cost you grain.
- Combine Header Maintenance RecordWhat to inspect and record on a combine header: knives, guards, reel, augers, drives and gearboxes, with notes on matching parts and buying salvage safely.
- Dealer Service Contact SheetBuild a one-page dealer and service contact list that gets you the right part and the right person fast, with what to have in hand when you call about a machine.
- Disc Harrow Maintenance LogKeep a disc harrow working: blade wear, bearings, gang bolts, scrapers, hitch and transport locks, plus matching parts and judging salvage gangs safely.
- Electrical System Troubleshooting WorksheetTrace farm machinery electrical problems by symptom: no crank, dead lights, blown fuses, charging faults. Use a meter, find the cause, and know when to call a pro.
- Engine Oil & Filter Change TrackerHow to change farm engine oil and filters properly, choose the right oil and filter, keep a useful record, and read used oil for early warning of engine trouble.
- Equipment Depreciation & Replacement WorksheetHow to judge when a tractor or implement has stopped paying its way, using repair history, parts availability, downtime cost and tax depreciation as a guide.
- Equipment Fire Response ProcedureWhat to do in the first minutes of a tractor, combine or shop fire: when to fight it, when to get out, how to use an extinguisher, and what to do afterward.
- Equipment Inspection Schedule CalendarBuild a simple year-round inspection calendar for farm machinery, matching checks to the seasons so nothing gets missed before the busy weeks arrive.
- Equipment Transport Tie-Down ChecklistHow to secure a tractor, skid steer or implement on a trailer for the road: positioning, chains and binders, checking after a few miles, and what to avoid.
- Equipment Warranty Registration TrackerHow to register new farm equipment, keep warranty paperwork where you can find it, and avoid the service and record mistakes that get claims denied.
- Extinguisher Placement & Inspection LogWhere fire extinguishers belong on farm machinery and in the shop, which types to choose, and how to check them so they work when a fire starts.
- Farm Equipment Fire Prevention ChecklistPractical ways to keep tractors, combines and balers from catching fire: chaff buildup, leaking fluids, bearings, wiring, hot work and storing machines.
- Farm Equipment Winterization ChecklistGetting farm machinery ready for winter storage or cold starts: fuel, coolant, batteries, hydraulics, moisture, rodents and tire care, plus spring recovery.
- Farm Shop Safety Audit ChecklistA walk-through audit of the farm shop covering guards, electrical, lifting, fire, ventilation, chemicals and first aid, with advice on what to fix first.
- Farm Truck Pre-Trip InspectionA quick walk-around for farm trucks and grain haulers before they hit the road: tires, brakes, lights, hitch, load and cab, with signs that mean stay parked.
- Finish Mower Maintenance ChecklistHow to keep a tractor-mounted finish mower cutting clean: blades, spindles, belts, gearbox, deck and anti-scalp parts, plus what to stock and when to buy new.
- First Aid Kit Inventory for Machinery OperatorsWhat a tractor and shop first aid kit should hold for cuts, burns, eye injuries and crush hurts, where to mount it, and how to keep it stocked and useful.
- Front-End Loader Safety InspectionA walkaround for tractor front-end loaders: frame, pins, cylinders, hoses, bucket, quick-attach and the rollover and drop hazards that matter most before each job.
- Grain Auger Safety Inspection ChecklistWhat to check on a portable or sweep grain auger before it runs: guards, driveline, flighting, wheels, power lines and lockout, and when to stop and get help.
- Grain Cart Maintenance RecordKeep a grain cart ready for harvest: gearbox, auger, flighting, unload clutch, scale, tires, brakes and hitch, with notes on what to log and which parts to stock.
- Grain Dryer Operation & Maintenance LogA working guide to logging grain dryer runs and upkeep: burner, fans, screens, sensors, fire risk and parts to stock before the first wet load of harvest.
- Grapple Bucket Maintenance RecordCare for a grapple bucket on a loader or skid steer: pins, cylinder, tines, hoses, welds and quick-attach, plus what to log, stock and replace rather than repair.
- Gravity Wagon Inspection FormHow to inspect a gravity wagon before harvest: running gear, gears, hitch, tongue, brakes, tires, gates and hazards, with notes on parts to stock and salvage.
- Grinder Safety Inspection ChecklistSafe use and inspection of bench and angle grinders in the farm shop: wheel condition, guards, rests, eye and hearing protection, sparks and when to replace.
- Hand Signal Guide for Farm EquipmentSimple hand signals for hitching, backing, loading and shutdown around tractors and implements, with rules for spotters, visibility and noise on the farm.
- Hay Equipment Maintenance CalendarHow to space out hay equipment work across the year so mowers, rakes, tedders and balers are ready when the weather window opens, with parts to stock early.
- Hay Harvest Equipment ChecklistA practical pre-cutting check of mowers, conditioners, rakes and balers, with what to look and listen for, and which parts are worth stocking before the first cut.
- Hydraulic Injection First Aid GuideWhat to do, and what not to do, if high-pressure hydraulic fluid hits skin on farm equipment, plus how to prevent pinhole leaks that cause these injuries.
- Hydraulic Press Safety ChecklistSafe use of a shop hydraulic press: frame and ram checks, guarding, load centering, stored energy, and when to stop, plus parts to inspect before pressing.
- Hydraulic System Leak Inspection LogHow to find, trace, and rank hydraulic leaks on tractors and implements, what each kind of weep means, and how to keep notes that make repairs easier to plan.
- Implement Hitch & Safety Chain InspectionWhat to check on drawbars, hitch pins, clevises, and safety chains before towing an implement, which worn parts to replace, and why salvage is the wrong choice.
- Irrigation Engine Service LogHow to keep a service log for a diesel or gas irrigation engine: what to record at each run, the wear signs to watch, and the parts to keep before pumping season.
- Irrigation Pump Maintenance LogA practical guide to logging irrigation pump checks: packing and seal leaks, bearing noise, vibration, suction problems, and which wear parts to keep on the shelf.
- Lagoon Pump Inspection RecordSafe inspection of a manure lagoon pump: gas and confined space hazards, power and cable checks, wear signs, and what to leave to a qualified technician.
- Lighting & SMV Emblem Inspection FormHow to check lights and the slow-moving vehicle emblem on tractors and towed implements before road travel, with common failures, causes, and parts to carry.
- Livestock Trailer Safety ChecklistWalk a livestock trailer from hitch to gate latches before every haul: floors, tires, brakes, lights and parts worth stocking or never buying used.
- Livestock Trailer Ventilation ChecklistHow to check and manage airflow in a livestock trailer so animals stay cool and breathing easy, including vent hardware wear and parts to inspect or replace.
- Loader Bucket Wear Inspection LogWhat to inspect on a loader bucket, from cutting edge and wear strips to pins, bushings and mounting, and when to rebuild with new or salvage parts.
- Machinery Repair LogHow to keep a machinery repair log that actually helps: what to write, how to record part numbers and salvage sources, and how it saves money later.
- Manure Spreader Beater InspectionInspect manure spreader beaters, paddles, chains and gearbox before spreading season, with notes on wear, wrap, shields and which parts to buy new.
- Pallet Fork Inspection ChecklistInspect pallet forks on a loader, skid steer or telehandler for cracks, heel wear, bent tines and latch problems, and know when to retire them for good.
- Parts Inventory Tracking SheetSet up a simple parts inventory for your farm shop: what to stock, how to record part numbers, and how to find salvage sources before a breakdown.
- Portable Generator Maintenance LogKeep a portable generator ready for outages and field work: fuel care, oil and filters, load tests, safe operation and which spare parts to carry.
- Power Beyond Hydraulic Setup WorksheetUnderstand how power beyond works on a tractor, how to plan the hose and coupler connections, and common mistakes that cause heat, leaks or sluggish implements.
- Pressure Washer Maintenance RecordKeep a farm pressure washer running: pump oil, inlet screen, hoses, unloader and nozzle wear, winter storage, and safe use around electrical gear and skin.
- Preventive Maintenance Calendar for Farm EquipmentHow to build a preventive maintenance calendar around your seasons, with parts stocked ahead so a worn belt or filter never stops a machine at the wrong time.
- PTO Safety & Shield Inspection FormWhat to look at on PTO shafts and shields before every season: guards, bearings, clutches and couplers, and when a worn shield means replacing it.
- Rake & Tedder Maintenance ChecklistPractical upkeep for hay rakes and tedders: tines, tine arms, bearings, gearboxes and wheels, plus what to stock so hay does not sit waiting on a part.
- Road Transport Safety Checklist for Farm EquipmentA walk-around and driving routine for moving tractors and implements on public roads: lights, hitch, brakes, width, speed and the habits that prevent crashes.
- ROPS & Seatbelt Compliance ChecklistHow to check a tractor's rollover protective structure and seatbelt: what to inspect, signs a ROPS is unsafe, and why a used or modified frame is never worth it.
- Rotary Cutter Blade Inspection FormHow to inspect rotary cutter blades, bolts, blade carriers and gearbox before mowing: wear limits, balance, thrown-object risk, and what to replace.
- Rotary Hoe Maintenance ChecklistCare of a rotary hoe: wheel spoons, arms, springs, bearings and gangs, with notes on setup, field adjustment, and which wear parts to keep in stock.
- Round Baler Belt Tension ChecklistTroubleshooting round baler belts: tension, tracking, splices and lacing, rollers and wear signs, plus when to stop and call the dealer.
- Shop Crane Inspection ChecklistHow to inspect a shop crane or engine hoist: legs, casters, boom pins, hydraulic ram, load chain and hooks, with a clear rule on when to retire it.
- Shop Tool Inventory & Maintenance LogHow to keep track of shop tools, who has them and what shape they are in, so repairs go faster and the right part or wrench is on hand when a machine is down.
- Silage Harvest Equipment ChecklistGet the chopper, kernel processor, trucks and packing tractor ready before silage season, and learn which wear parts to stock so one breakdown does not cost a day.
- Silo Unloader Inspection FormHow to inspect a top or bottom silo unloader safely, what the cutter, chain and gearbox are telling you, and which parts to check before you buy used.
- Skid Steer Daily Inspection ChecklistA five-minute daily walkaround for skid steers: fluids, tires, quick-attach, lift arms, safety bars and hydraulics, plus what to stock and when to call a dealer.
- Slurry Tanker Maintenance ChecklistKeep a slurry tanker running with a look at the pump, valves, tank, axle and hoses, plus the rust and plugging problems manure causes and which parts to carry.
- Sprayer Nozzle Wear & Calibration RecordHow worn sprayer nozzles throw off your application, how to check output by catching and comparing flow, and how to keep a simple record and spare parts on hand.
- Spring Equipment Ready ChecklistWalk the whole farm fleet in late winter so planting does not stall: tractors, planters, sprayers, trailers and the parts to order now, in the order that matters.
- Spring Start-Up Checklist for TractorsWhat to check before the first spring start on a tractor that sat all winter: fuel, battery, fluids, belts, tires and hydraulics, and the problems to expect.
- Square Baler Maintenance LogWhat wears on a square baler, from knotters and needles to plunger bearings and shear bolts, and how to log it so breakdowns stay out of hay season.
- Subsoiler Wear Inspection FormHow to inspect a subsoiler for worn shanks, points, shin guards and cracked frames, when to rotate or replace wear parts, and what to check before buying used.
- Telehandler Pre-Use Inspection FormA pre-use telehandler inspection: tires, boom, forks, outriggers, load chart and controls, with notes on what to stop for and which parts to buy new.
- Three-Point Hitch Maintenance ChecklistHow to inspect lift arms, top link, lower link ends, sway chains and lift cylinders on a three-point hitch, and which worn parts to stock or replace new.
- TMR Mixer Maintenance RecordWhat to inspect and keep records of on a TMR mixer: knives, augers, gearbox oil, scale heads and chains, plus when salvage parts make sense and when to buy new.
- Tractor 250-Hour Service WorksheetA practical walk through a 250-hour tractor service: fluids, filters, grease points, belts and hoses, plus how to find intervals and part numbers for your model.
- Tractor 50-Hour Maintenance LogWhat a 50-hour tractor check really covers: grease points, fluid levels, tire and hitch checks, plus how to log hours and part numbers so nothing gets missed.
- Tractor Ballast & Weighting GuideHow front weights, rear weights and wheel ballast affect traction, steering and stability, how to read the manual, and the safety limits that prevent rollovers.
- Tractor Daily Pre-Operation Inspection ChecklistA five-minute walk-around before you start the tractor: what to see, hear and feel, which problems mean stop, and which wear parts to keep in the shop.
- Tractor Operation LogWhat to record about each tractor job, from hours and fuel to odd noises and part numbers, and how a simple log helps with service timing, repairs and resale.
- Tractor Rollover Emergency ChecklistWhat to do if a tractor tips or rolls: staying in the seat belt, getting help, handling fuel and batteries, and why a rolled tractor needs inspection before reuse.
- Tractor Rollover Prevention ChecklistPractical habits that keep tractors upright: slope and ditch awareness, load carrying, ballast, hitching, speed, and the ROPS and seat belt that save lives.
- Tractor Tire Pressure & Wear RecordHow to check tractor tire pressure and wear, read lug and sidewall damage, and keep a simple record, with notes on buying new versus salvage wheels and tires.
- Trailer Floor & Ramp Inspection LogHow to read a trailer deck and ramp for hidden rot, cracked welds and worn hinges, and when a used or salvage replacement part is a sensible choice.
- Trailer Light & Brake Inspection FormA practical way to check trailer lights, brake wiring, breakaway systems and wheel-end parts before hauling, with notes on when salvage parts make sense.
- Welder Safety & Maintenance ChecklistShop welder safety and upkeep for farm use: cable and ground checks, fire and fume control, wire feed wear, and which replacement parts are safe to buy used.
- Wheel Bearing Repack RecordWhen and how to inspect and repack tapered wheel bearings on farm trailers and implements, with failure signs, mistakes to avoid and buying parts used or new.
- Workshop Ventilation ChecklistHow to assess airflow in a farm shop: exhaust and carbon monoxide risks, welding fume capture, solvent and paint vapors, and where stored parts and rags fit in.