Parts & Salvage Directory

Auger & Conveyor Inspection Record

Augers and conveyors move grain, feed and fertilizer all year, and the damage they do to people is out of proportion to how simple they look. They also wear quietly. By the time one makes a noise, the flighting or the bearing has usually been going for a season.

Lock it out first

Every inspection begins with the power off, locked out and tagged, and with the unit empty and stopped. Stored energy is a real hazard: a flighting with grain on it can move when it is jostled, and a tractor PTO can be bumped. The OSHA lockout/tagout guidance explains the procedure. Never step into a hopper or reach into an intake with the machine running or with product above you.

What to look at on an auger

Start at the intake, where the flighting wears fastest. Look at the leading edge of the flighting where it meets grain. A flight that has worn thin, rolled over or been polished to a knife edge moves less and wears the tube. Look inside the tube at the clearance. A dark ring of polished steel along the tube tells you the flighting is rubbing.

Check both end bearings and any hanger bearings. Spin the shaft by hand where you can and feel for roughness and play. Look for grease that has been forced out and dried, or none at all. The drive end is where the chain, belt or gearbox sits, so check the belt for glazing and cracking and the chain for stiff links and stretch. Look at the gearbox for seepage and its breather for being plugged.

Finally, check the guards, and treat missing ones as a stop sign. Intake guards, drive guards and PTO shields should all be in place, not zip-tied up out of the way. A shield that is cracked or spins freely on a PTO is as good as gone. See the PTO safety shield inspection form for details.

Conveyors and elevators

On belt and chain conveyors, check tracking first. A belt that wanders to one side is wearing its edge and may be misaligned or have a worn roller. Look at the splice or the lacing for fraying. On chain conveyors, check for stretch by watching how slack hangs, and look at sprocket teeth for hooked shapes, which mean the chain and sprocket should be replaced as a set. Mismatched wear makes a new chain wear out quickly.

Idler rollers should turn freely. A seized roller will burn a groove into the belt. Look at the take-up and the tail end, where fines pile up and hide problems.

Recording what you find and buying parts

Make a short note after each inspection with the date, the hours or season, what you changed and the part numbers of what you bought. When you replace flighting, bearings or sprockets, the label on the machine and the serial number let the dealer match the pitch, diameter and shaft size. Do not guess, because pitch and shaft sizes differ even within a model line.

Salvage flighting sections and gearboxes can work if they are straight, uncracked and match your tube diameter. Buy guards, chains under shock load and anything safety-related new. To find a yard or dealer, use the state directory. A related guide is the grain auger safety inspection checklist.

General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.

Sources: OSHA Lockout/Tagout · NIOSH Grain Handling