Tractor Operation Log
A tractor operation log is nothing fancy: a notebook that rides in the cab or sits at the shop door. Its value comes from being the same every time. After a year of entries, you can answer questions that otherwise rely on memory: When did the hydraulic filter last get changed? Did that noise start before or after the last repair? Is this tractor using more oil than it used to?
What to write down
Keep each entry short. A date, the hour meter reading, the job, and a line for anything unusual is enough. Add fuel added if you track it, and any fluid you topped off with how much. If the tractor makes a noise, record where it came from, when it happens (cold start, under load, going downhill) and whether it came with a smell or warning light. Describing it precisely helps a mechanic far more than "it sounded off."
Also record service work: what was changed, the hour meter reading, and the part number or brand of the filter or belt. Part numbers are the thing most farmers regret not writing down. Put the tractor's model and serial number on the first page, because parts catalogs are often split by serial range.
Using the log to time service
Intervals for oil, filters and grease are in the operator's manual. The log lets you see when each is due, rather than guess. Write the next due hours at the bottom of every service entry. The tractor 50-hour maintenance log and the tractor 250-hour service worksheet describe what each of those services involves.
Spotting trends
A single entry rarely tells you much, but a pattern does. If you top off hydraulic fluid every few weeks, there is a leak. If the tractor has been getting hard to start at the same time each morning, look at batteries, glow plugs or fuel. If the hours-per-fuel number creeps up, check the air cleaner, tires and injectors. If a repair keeps coming back, the log shows how many hours it lasted, which helps decide between a salvage replacement and a new one.
Parts decisions
When a part fails, the log tells you the age and use of the part. A part that failed at very low hours may be a bad batch or a symptom of another fault, such as misalignment. Salvage parts are good for covers, brackets, fenders, steps and some castings that are not cracked. For brakes, steering, hydraulic hoses, seat belts and shields, buy new. You can find parts yards through the state directory.
Handy extras
Record who drove it and what implement was hooked up. Keep a copy of any recall or service bulletin the dealer sends. At sale time, a log with service dates and part numbers is a better selling point than any amount of talk. The machinery repair log works well alongside it for larger jobs.
When the entry is written and the tractor is in the barn, the farm humor and stories at farm.FM make a decent way to spend ten minutes before supper. For safe operating habits, the OSHA agriculture page and NIOSH agriculture pages are worth a read.
General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.
Sources: OSHA Agriculture · CDC NIOSH Agriculture