Parts & Salvage Directory

Preventive Maintenance Calendar for Farm Equipment

A maintenance calendar that hangs on the shop wall and never gets looked at is worse than none, because it gives the feeling of being on top of things. The calendars that work are built backward from the busiest week each machine has, not forward from January 1.

Start with the crunch week for each machine

Every machine has a window when downtime hurts most. The baler has first cutting, the combine has harvest, the planter has the first dry stretch in spring, the sprayer has whenever the weeds and the weather line up. Write that window down first. Then work backward: the machine should be fully serviced and test-run two to three weeks ahead, so there is time to wait on a part that turns out to be backordered.

Most machines need two kinds of entries. Hour-based items, such as engine oil, filters and greasing, follow the hour meter, and the intervals are in the operator's manual. Season-based items, such as belts, chains, knives, tires and hoses, follow the calendar because they wear or age whether or not the machine ran much. A tractor that sat all year still has rubber that has aged.

Tie the parts to the dates

The calendar earns its keep when each entry carries a part. If the entry says "replace fuel filters," the list beside it should say which filters, with the part numbers copied from the parts catalog or the old filter itself. Keep a running list in the shop, and order wear items when the calendar entry is a month out, not the day it comes due.

A few habits that save grief:

  • Photograph the data plate on every machine and keep the serial number with the calendar. Parts often change within a model run, and the serial number settles which one fits.
  • Buy filters and belts in pairs, one to use and one to shelve, so the next service starts without a trip to town.
  • Keep a short list of parts that have failed before. A machine that has thrown the same chain twice will do it again.

For a deeper look at tracking what is on the shelf, the parts inventory tracking sheet guide covers how to keep that stock list honest.

Let the calendar react to what you find

A good calendar is revised every time something fails. If a hydraulic hose let go in July, add a hose inspection the following spring and move it earlier. If a bearing was found dry at service, shorten the greasing gap in your notes and check what the manual says about that fitting. The tractor's regular service sheets, like the tractor 250 hour service worksheet, slot into the calendar as recurring entries rather than replacing it.

Salvage parts have a place here for older machines, especially covers, brackets, and castings that the manufacturer no longer sells. Brakes, hitches, shields, chains and hoses are another matter: buy those new, because a hidden crack or tired rubber is not worth gambling on. When a part has to come from a yard, the state directory is a quick way to find yards and dealers near you.

Keep it where people will see it

Put the calendar in the shop, one page per machine, and mark things off in pen. Review it each fall and each late winter. Extension machinery specialists, such as those listed through Extension, publish seasonal service reminders that are worth comparing against your own. When a service item is beyond what the shop can do, such as injection pump or transmission work, book the dealer early in the off-season, not in the first week of planting.

General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.

Sources: eXtension Foundation · OSHA Lockout/Tagout · ASABE