Farm Shop Safety Audit Checklist
The farm shop is where a lot of the injuries happen: grinders, welders, jacks, compressed air, solvents and tired people working fast. An audit does not need to be formal. Walk the shop with a notebook, look at it the way a stranger would, and fix the worst items first.
Start with what can kill quickly
Look for these before anything else:
- Lifting and support. Never work under a machine held only by a jack or a loader. Use stands rated for the load. Check hoists, chains and slings for wear. See the chain hoist inspection log.
- Energy control. Equipment should be locked out before service. OSHA's lockout/tagout page explains the principle. Do you have locks and tags where people can find them?
- Fire. Are there extinguishers, and are they charged? Are oily rags in a covered metal can? Are welding areas clear of flammables?
- Electrical. Look for cords with damaged insulation, overloaded outlets and missing cover plates. Use ground-fault protection where the shop is wet. Have an electrician handle anything beyond basic repairs.
- Air quality. Engines running in a closed shop produce carbon monoxide. Check the workshop ventilation checklist.
Machines and tools
Check each stationary tool: grinder wheels without cracks and with tool rests set properly, guards in place on saws and drills, and belts and pulleys covered. Replace damaged wheels instead of continuing to use them. Make sure the people who use them wear eye and face protection, and hearing protection around loud tools.
Look at the compressed air system for hoses with cracks and fittings that leak. Never point an air nozzle at skin, and never clean clothing with it. Hydraulic fluid under pressure can enter the skin, so if anyone is injured by a high-pressure jet, treat it as an emergency and get to a hospital quickly. The hydraulic injection first aid guide covers this in detail.
Housekeeping and storage
Floors should be free of oil, loose cords and clutter. Keep exits and aisles open. Store fuels and solvents in approved containers away from ignition sources. Label chemical containers and keep the product information sheets where people can read them. Keep tires, steel and heavy parts stacked so they cannot fall.
People and first aid
A first aid kit should be stocked, visible, and checked every season. Post emergency numbers and the farm's physical address by the phone, since a caller panicking cannot always remember the road. Make sure someone knows where the nearest hospital is. Anyone working alone should have a way to call for help.
What to do with the findings
Sort the list into three piles: fix today, fix this month, and plan for. Anything that could cause a serious injury sits in the first pile. Write down who will do what and by when.
For questions about what rules apply to your operation, contact OSHA or your state agency. OSHA's agriculture page is a good place to start. Repeat the audit each year and after any near miss. When the shop passes, a few minutes at farm.FM is a fair way to end the day.
General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.
Sources: OSHA Lockout/Tagout · OSHA Agriculture · CDC NIOSH Agriculture