Parts & Salvage Directory

Lighting & SMV Emblem Inspection Form

Most farm road collisions involve a faster vehicle coming up on a slow one that the driver saw too late. Working lights and a clean, visible emblem are what give that driver time. Check them before you pull out, not after the first complaint.

Walk-around at dusk logic

Do the check with the machine running or the key on, and do it with a helper if possible, or use a reflective surface. Test, in order: headlights, taillights, brake lights, turn signals, hazard flashers, and any work lights that cast glare. On towed implements, look at the lights on the implement itself, not only the tractor, since a wide implement can block the tractor's lights from view. Add reflectors or lights where the implement extends beyond the tractor's width, following your state's requirements.

Lenses cracked or filled with water, corroded sockets, and loose grounds are the usual culprits. A light that flickers when you tap the housing is a ground or connector problem. Hook-up plugs between tractor and implement are another weak point: bent pins, corrosion, and cracked insulation are all common. If one tail light is out, check the bulb, the socket, and the ground before replacing the whole lamp. The electrical system troubleshooting worksheet shows how to trace faults.

The emblem

The slow-moving vehicle emblem is a fluorescent orange triangle with a red border. Sun fades it, and dust and dried mud cover it. A faded or dirty emblem does not do its job. Replace a faded one, keep it clean, mount it where following drivers can see it, and take it off or cover it when the machine is not on a public road if that is your state's practice. Do not mount it where hay, tools, or the implement hide it. Details on requirements vary, so check with your state agency; the NHTSA and state transportation departments provide guidance, and ASABE publishes the standards that define these markings.

Brakes and the rest of the trip

Lighting is just one part of road readiness. See the road transport safety checklist for farm equipment for the bigger picture, including speed, hitching, and wide loads.

Parts to keep and where to find them

Carry spare bulbs or LED units of the correct type, fuses, a spare plug or connector, dielectric grease, and a spare emblem. Write down the lamp part numbers from the parts catalog, since lamps differ between model years. New lamps and wiring are cheap and are better than salvage, because salvage lighting often arrives with corroded connectors and cracked lenses. Your local dealer can help you find suppliers.

If wiring shows burned insulation or repeated blown fuses, stop and have it examined, because that can lead to a fire.

General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.

Sources: NHTSA · FMCSA · ASABE