Parts & Salvage Directory

Combine Header Maintenance Record

The header is where the combine meets the crop, and it takes the abuse: rocks, sticks, lodged stalks and hours of vibration. Most header trouble gives warning. Learn to read it and you will fix things on your schedule instead of the field's.

Cutterbar and knife

On a draper or auger platform, the knife is a row of sections riveted to a back bar, running in guards. Look for:

  • Missing, chipped or dull sections. A few dull sections make ragged cuts and shatter losses.
  • Bent guards or guards with worn knife slots; a knife running in a worn guard will bind or heat.
  • Knife head and drive arm: loose bolts or wallowed holes show up as vibration you can feel through the cab.

Pull the knife and flex it by hand when you can. A bent or cracked back bar needs replacement. Align guards per the manual so the knife has the specified fit; the manual and dealer can tell you the settings for your model.

Reel, auger and drives

Spin the reel by hand with the machine locked out. Look for bent tines, worn cam tracks, loose bearings and sagging reel arms. Check the reel drive chain or hydraulic motor for leaks and wear. On auger headers, look at flighting wear and the retractable fingers.

Draper belts and rollers deserve attention: check the belts for cuts, tears and lugging, tracking, and the slats and splices. Rollers that wobble or run hot are failing.

Gearboxes, driveshafts and hydraulic hoses at the back of the header are easy to forget. Look for oil weeping from seals, check the oil level per the manual, and look for chafed hoses where they flex.

What to write down

Keep a short running record in the shop notebook: hours or acres at service, what you replaced, and any odd noise. Record the header model and serial number, plus part numbers for knife sections, guards, belts and bearings. A dealer can only match parts reliably if you give the exact model and serial numbers.

Buying parts, new and used

Knife sections, bearings and belts are wear items and worth stocking new. A used header gearbox or reel arm from a salvage yard can save money if the model and serial range match and you inspect it for cracks, worn splines and leaking seals. Buy new for shields, driveline guards and safety latches. When in doubt, ask for help from the dealer, and use the state directory to find parts sources near you.

Safety first

Always shut the combine down, remove the key and lock out the header before reaching near the knife, and use the reel prop or safety stand whenever you work under a raised header. See OSHA lockout and tagout. The overall harvest plan is in the combine harvest preparation checklist, and the shop-side upkeep is in the rotary cutter blade inspection form.

General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.

Sources: OSHA Lockout/Tagout · OSHA Agriculture