Parts & Salvage Directory

Extinguisher Placement & Inspection Log

An extinguisher that is empty, buried or out of reach is worse than none, because it gives false confidence. On a farm, the places that need one are easy to list, and the monthly check takes about a minute per unit.

Where they belong

Put an extinguisher where you can reach it on the way out, not where the fire will block it. Typical spots:

  • Tractors, combines and self-propelled machines: mounted in or beside the cab, within easy reach of the operator's seat and the exit. A unit in a bucket of rags behind the seat is not mounted.
  • Shop: near the main door and near the welding and grinding area, with a clear path to each.
  • Fuel storage and fueling area: close enough to reach quickly, but not so close that a fire at the tank would block it.
  • Hay and equipment sheds: by the main entrance.
  • Pickups and haul trucks: one in the cab or reachable from outside.

Mount them with a bracket rated for vibration, because a loose cylinder bouncing around a cab is a hazard in itself. Keep them visible and away from heat. If you are unsure about rating requirements for your buildings, ask your insurer or local fire marshal, and see NFPA for general guidance.

Choosing the type

For general farm use, a multipurpose dry chemical unit rated for ordinary combustibles, flammable liquids and electrical fires is the common choice. The label shows the letters. Read it. Water-type extinguishers are not appropriate for fuel or electrical fires. A larger unit holds more but is heavier, so pick one the people who run the machines can actually lift and operate.

The routine check

Once a month, and before harvest, walk through each one:

  1. Is it in its place, visible, and not blocked?
  2. Is the pressure gauge in the green zone, if it has a gauge?
  3. Is the pin in place and the tamper seal intact?
  4. Is the hose or nozzle clear, with no cracks and no nest of dirt or insects?
  5. Is the body free of dents, rust and corrosion?
  6. Is the date or tag current?

Dry chemical units can pack down from vibration. Some operators turn the cylinder over and gently tap the bottom, as per the label, to loosen the powder. Follow the manufacturer's instructions on the unit.

Note the date and initials on the tag or in a log. Combine this with your farm equipment fire prevention checklist.

Service and replacement

Extinguishers need professional servicing and testing on a schedule set by the manufacturer and local rules. A fire equipment service company can handle inspection, recharging and testing. Replace any unit with a low gauge, damage, a missing pin or an expired tag. Recharge a unit after any use, even a brief burst.

Train the people using them

An extinguisher is only useful if the person holding it knows what to do. The equipment fire response procedure explains when to fight a fire and when to leave. Show each driver and hired hand where the units are, and let them hold one.

General information only. Follow the operator's manual, your dealer's service guidance and the parts catalog for your specific machine.

Sources: NFPA · OSHA Agriculture